Time travel capasity - ufolight
From thr sources I came in contact with , the belief that time travel is posible are posible , but they claim the expense would be more than our world could aford.
According to the technology I have come aquainted with, the only cost would be construction of the initial vehicle ,or, machine.
Light has electronic ,magnetic , and wave frequency components as we easily observe.
These basic principles of light are the building blocks for time/space travel.
Einstein made us well aware of the curvature of space /time. That is a key relativity to how the devices are powered, and work.
I'll throw out a simple clue: The Laser.
Think of a galaxy, a black hole or an atom; and visualize dimensional applications of that same principle structure.
We can make a pure natural energy (not quite overunity) generation; because the equation works on the axis of perfect equality. The generation equals the needed supply, so that there is no "over" unity ; but tyhe perfect supply unity.
We start with a laseing effect, but step up with the proper design till it is super laseing, then sending it through a condensation funnel effect, and after the energy is enhanced by a crystal plasma chamber, you send it into a oscilating spiraling flux of harmonics to space time.
This is where the time vector console comes in, but I've not yet been released to reveal that much yet.
Two key words of what I'm talking about are :
Curvature of time /space, and, natural perpetuation; as atom/universe functions.
= once made = free
UFO TX 11-27-00 - ufolight
This morning, at just after 5 am, my 2 boys & i were loading the truck to start off the day.
My youngest, 9year old, says "Is that a ufo?"
I looked , but at first was looking too high.
Just over the tree tops , a few miles west, heading south, was a huge V shaped thing with lights at far more amounts than any plane or anything I'd known of. My son says it was very bright before I saw it, and that it changed shape into the V shape I finally saw it as, but both of us watched it disapear.
There was no fog or clouds, so I wonder how it disapeared if it was military?
dna aspect - ufolight
Yes, i had mentioned how some examples are public knowledge, like the astronauts who have reported a beam of light passing through their ship & how they could feel a sensation as it passed through their body; They are scanning the human dna and reading purpose and intent.
They read lots of things, and prevent the passage of those they dont let. They can even cause troubles with our craft disabling the mission, if it does not meet their approval.
They have a grid system network spanning our planet, which I'm not aware if it is completed yet, But I spoke about a year ago of how I had received a series of grafic detailed dreams of how and why they put the grid there(which is slightly out of phase to our normal observing range) This can be seen as what is and how to find it in the black vault, where it talks about how to film the ufos in daylight.
I could talk for hundreds of hours about the details to where you would know that what I know and say is true. But that is exausting for me to keep going over it.
maybe soon I'll get the time & energy to add a lot more in those lines on my web site at
http://www.geocities.com/ufolight
But for now , good night, I get up in 5 hrs.
Light craft - ufolight
As far as what I've found shown publicly, they still are not on tract. I have photos in this club of what they are doing, but when I was communicating with them about what is suposed to be done, they no longer replied to me.
I keep after it, knowing the web is monitored regularly, so that eventually someone in their line of R&D will want to talk with me again.
Here is a URL to refresh members & visitors here, of what They are doing
Click Here
And
Here
Keeping in mind, they are not doing the right thing with it; The basic tech of the lightcraft is only one small section of the beginning of a generating section of an engine that altamatly generates waves that enable antigravity/propulsion.
gyroscopics - ufolight
The gyroscope was a most excellent choice. I personally have a bunch of them for prototype experiments. I even have one of those new style plastic ones shaped like a disc ufo, with a wind turbine inside, that you blow into; I love to get exausted trying to make it go extreemly fast.
There is a gyroscopic element in the ufo design I have, but it's not part of the main propulsion drive; I've never gotten that detailed yet about the whole design on line.
Those "toys "are used in all sorts of air & space craft for stability, and gauges .
I get a real thrill out of showing young children how it seems to defy gravity.
There are places that have been doing tests and research on the use of gyroscopes to generate and maintain flight in the air.
I have a special set of designs that use huge massive gyros kept at determined frequencies for different purposes , and at particularly arranged angles. These have to be perfectly in balance, and very strong or else it would come apart and be like a giant handgernade; But made and used right it has definent purpose. They work in conjunction with what I have slightly revealed as what I call tri-nuclear integration; this not only is comprised in the makeup of the ships material, but also is a synthetic atom in a massive scale; this is what is used in with my huge gyroscopes. I'm refering to UFO technology as was revealed to me.
The rest of that copied -- ufolight
Well there is a bit more I can tell you about the propulsion design. I'll skip basicly all of the 2nd section , in the middle. it interacts with the mother ship and can be set to be the main energy source of the mother ship.
But a bit about the lowwer portion of the engine. It is mainly comprised of a very special compasition of hydrogen panels that looks like a sphere geodesic dome. It is held in place gyroscopicly from the energy force that enters its area from the middle stage, sort of like that old display seen in sears years ago, where a vacumm is set to blow air, & the nozzle is aimed up at an angle, & a beachball spins balanced in the airflow. There is a similar principle at work in the lower engine, where the flow of emited energy causes a vacuum that does several things at once; some inters the lower sphere at a measured rate through a reverse funnel, while the rest rushes out around the outside holding the design in place. The pannels are semi trans lucent/semi reflective to the energy field inside. In the center of the lower sphere is a massive simulated atom. this atom is simulated only somewhat in structure; the main thing it does is replicat the frequencies of atomic gravity waves in a massive concentration. This way, powerful atomic gravity wave energy is utilized in the large scale, to tune in & out with planetary waves & overpower them.
the emited field energy is what I described before. We only let out this much information to let the ones who have the needed funds to see, We are not at all telling stories, except true ones.
copied from sftt - ufolight
To Jerry . Just to remind you, it's ufolight, not lite; My online name, ufolight, is a representation of the basis for the ufo type engine that I understand . It uses a laser as the starting phase in the upper section of the three sections.
I posted in my club pictures of the light craft to help readers envision not only the structural design, but also the reality of this technology.
As the light craft recieves a beam of light from the ground , up into the mirror like inner surface, the beginning section of the tech I know has the beam on board, and part of the interior of that upper section of the drive unit.
The upper unit in the center, is like the light craft in some respects, that the interior is a highly polished surface, but differes in every other way after that. The laser doesnt just get aimed up into it, it gets aimed up exactly on the tip of the conical tiny tip, whereas theirs just goes in anywhere. the design of the inside and the center conical extending down from the center are of precise angles and micro tip point. This enables the first phase of the laser action to go into a much higher intensity, not for the purpose of ignition, like the lightcraft, but for the first stage of generating a super charged double steped up laser. The same basics of the creation of a laser is here taking a laser and causing it to make a massive super laser.
It is done like this; there is a chamber connecting the upper dish/conical with a lower dish/conical. Between these parts , the laser light is not only building up inside this design as a laser does, but it is stimulated by exterior plates that act as giant coils, generating an electromagnetic field. There is a slight difference in size between the outer edge of the lower dish/conical and the inner surface of the connecting chamber; this allows only enough of the super charged laser energy to escape donward towards the next stage of the engine, still also even as a regular laser does, but in a super stepped up mode.
We'er talking about a device that is at least made at 3 feet across, not including the coil plates; only the central lasing chamber.
there are many things about this section and the other sections that I am not at liberty to release to the public, due to an oath within a group called "The League" Each member of the league has all the knowledge the each other knows and holds in many copies in various places; Because there was a stage that our technologies were stolen, but now we have this group to prevent the theivory of it, and protects each of us from being eliminated for what we know or for being made to disapear for what we know. But at this point , All I can reveal is that the out put which drives the ship, is not of any kind of combustion, but of the wave prpoerties; it emits a wave that goes into and out of resonance of the frequency with gravity wave frequency. At that point gravity effects of earthward pull is nulified, and can be tuned for hover or repulsion type propulsion. Being free from gravity , even a blast of light or sound are used to travel in the desired direction. at this mode, there is also high energy that is generated that can be emited from several different drives.
If you want to go over all that I have released, it is in my club & on my web site.
But I will say this also, Keep in mind that I had no training or knowledge of technology when the vision of it began coming to me. It was after I began having recall of events from early childhood. Then after the fisrt stage was designed, they showed a year latter, on TLC the lightcraft, & I had no prior knowledge of how a laser was made, much less if it wiuld do what the light craft proved it does.
This topic really needs very lengthy space to reveal; as you can see by this small section revealed took so much space. We have over 400 pages of notes, pictures & diagrams describing the detail. It would need a big website to put it all in.
